Research progress of occupational hazards in plywood manufacturing / 中华劳动卫生职业病杂志

Occupational disease hazards in plywood manufacturing mainly include wood dust, formaldehyde, phenol, ammonia, noise, terpene, microorganisms, etc. The exposure is complex with multiple factors accompanied or coexisted. In the production process, these factors are exceeded, and mass occupational disease hazard events occurred among workers. Exposure to wood dust, formaldehyde, terpene, etc., put workers at increased risk of cancer. This article provides a review of this issue in order to provide a scientific basis for the prevention and control of occupational disease hazards in plywood manufacturing.

Desempeño Mecánico de Compuestos de Madera Plástica de Matriz Poliolefínica / Mechanical performance of polyolefinic wood plastic composites / Desempenho mecânicos de compostos de Madeira Plástica de Matriz Poliolefina

Resumen Los polímeros termoplásticos, pueden ser mezclados con diferentes tipos de cargas con el propósito de mejorar su rendimiento físico-mecánico, al mismo tiempo que permiten en muchos casos, generar soluciones a problemáticas ambientales como por ejemplo la disposición final de residuos de madera. Los compuestos de madera plástica son productos elaborados mediante la incorporación de fibras o partículas de madera en la matriz polimérica, donde la interacción entre los dos materiales (nula o con acople) es clave para lograr un adecuado desempeño del producto final. En esta revisión se establecen las matrices poliméricas y los tipos de maderas empleadas comúnmente en la elaboración de productos de madera plástica, al mismo tiempo que se definen los tratamientos previos que deben ser realizados tanto en la madera como en el polímero con el propósito de mejorar la compatibilidad de los dos materiales, y de esta manera mejorar propiedades como la absorción de agua, la resistencia a la descomposición, a la intemperie y el desempeño mecánico. En cuanto a las propiedades mecánicas, al adicionar un contenido de madera en el polímero se modifica la rigidez del material polimérico y la resistencia en tensión, flexión e impacto; sin embargo, se establece que es clave el uso de agentes funcionalizantes para que el efecto de la incorporación de la madera en polímero sea positivo. Finalmente se estudian las nuevas tendencias en el uso de diferentes tipos de residuos y matrices poliméricas para la elaboración de maderas plásticas.

Abstract Polymeric materials, especially thermoplastics, can be mixed with different types of fillers to improve their physical-mechanical performance, at the same time they allow, in many cases, to generate solutions to environmental problems such as the final disposal of wood waste. The plastic wood composites are products made by incorporating wood fibers in the polymer matrix, where the interaction between the two materials is key to achieve an adequate performance of the final product. This review establishes the polymer matrices and the types of wood commonly used in the production of plastic wood products, at the same time defining the previous treatments that must be carried out in the wood and in the polymer to improve the compatibility of the two materials, and in this way improve properties such as water absorption, resistance to decomposition, resistance to weathering and mechanical performance. Related to the mechanical properties, adding the wood fibers in the polymer modifies the rigidity of the polymeric material and the resistance in tension, bending and impact; however, it is established that the use of functionalizing agents is a fundamental key to improve the effect of wood incorporation into the polymer matrix. Finally, the new trends in the use of different types of waste and polymeric matrices to produce plastic wood are studied.

Resumo Os materiais poliméricos, principalmente os termoplásticos, podem ser misturados a diferentes tipos de cargas para melhorar seu desempenho físico-mecânico, ao mesmo tempo que, em muitos casos, permitem gerar soluções para problemas ambientais como a destinação final de resíduos. madeira. Os compósitos madeira-plástico são produtos obtidos pela incorporação de fibras de madeira à matriz polimérica, onde a interação entre os dois materiais é fundamental para um desempenho adequado do produto final. Nesta revisão, são estabelecidas as matrizes poliméricas e os tipos de madeira comumente utilizados na produção de produtos plásticos de madeira, ao mesmo tempo em que são definidos os tratamentos anteriores que devem ser realizados na madeira e no polímero para melhorar a compatibilidade dos dois materiais, e desta forma melhorar propriedades como absorção de água, resistência à decomposição, intempéries e desempenho mecânico. Em relação às propriedades mecânicas, ao adicionar as fibras de madeira ao polímero, a rigidez do material polimérico e a resistência à tração, flexão e impacto são modificadas; porém, está estabelecido que o uso de agentes funcionalizantes é fundamental para que o efeito da incorporação da madeira no polímero seja positivo. Por fim, são estudadas as novas tendências no uso de diferentes tipos de resíduos e matrizes poliméricas para a produção de madeira plástica.

Cumplimiento de las medidas de restricción del uso residencial de leña en la ciudad de Valdivia

Background: Atmospheric pollution is a problem that causes great concern and health risks for the population and the earth, as it affects developed countries and third world countries. Locally, there are no studies that prove the fulfillment level of the restriction about the usage of residential firewood, considering that since 2014 there is a procedure called "The Environmental Decontamination Plan" in Valdivia (PDAV). Aim: To determine the fulfillment level of the restriction about residential firewood and its related factors. Material and Methods: The population study were 594 homes that were assigned randomly and proportionally according to 2 territorial areas (A and B) established in the PDAV. The sample's characteristics were described, comparison techniques were applied by subgroups (sociodemographic, home's structures and humidity's perception and percentage of the firewood) to identify factors related mainly with the fulfillment of measurements about firewood usage. Results: 52% of households do not comply with the residential firewood use restriction measure, having sociodemographic factors related with this failure, such as schooling, health insurance and home structure. Besides, it is noted that the knowledge level of PDAV is associated with the accomplish level of restriction measures. When people know more about PDAV, there is a higher proportion of accomplishment. Conclusion: In more than half of the households, the restriction on the use of woodstove is not complied. The lack of knowledge of the population about the PDAV directly influences its compliance, which requires strategies to promote adherence to this program.

Heterobostrychus aequalis (Waterhouse, 1884) (Coleoptera: Bostrichidae): Its interception at the Harbor of Rio de Janeiro and relevance as a quarentine pest (A1)

Heterobostrychus aequalis (Waterhouse, 1884) (Coleoptera: Bostrichidae) is considered a severe pest for wood and wood products in regions where it is established. In Brazil, so far, there are no records of its establishment. Therefore, this work reports the interception of this Bostrichidae in the Harbor of Rio de Janeiro, on pallet wood from India. It also defends the maintenance of this insect as an absent quarantine pest (A1), by the Ministry of Agriculture, Livestock and Supply. It also conducts a discussion that addresses the efficiency of wood treatments, usually used to prevent the spread of quarantine pests in environments where there is international transit of wood, demonstrating that they may not be efficient in this regard, especially for insect species that have the capacity to lay eggs on dry wood. In this context, it also suggests population monitoring, combined with inspections, as an aid measure for the early detection of this pest in an environment where there is international transit of wood.

Wooden sticks for plaque streaking and microbiological inoculation might be more cost- effective, but is its large scale use feasible? Quality control methods and proof of concept / Métodos de controle de qualidade e prova de conceito para a utilização de palitos de madeira em microbiologia podem ser mais econômicas, mas seu uso em larga escala é viável? Método de controle de qualidade e prova de conceito

The loop is a material classically used in the laboratory for the purpose of plate streaking and handling biological materials. However, metal loops techniques might be time consuming, considering the amount of time spent to guarantee its cooling process through each inoculation. Furthermore, plastic loops may also represent environmental issues during its production and discard process and can also represent higher costs for the laboratory. Thus, in situations of limited resources, even the simplest materials can be restricted due to logistical and budgetary issues, especially in developing countries. Inspired by demands like these, facing an occasional shortage of supply of laboratory plastic handles, we hereby present a quality control for sterilization methods and cost-effectiveness studies towards the use of wooden sticks in a Latin American country and we discuss the possibility of the large-scale use of this technique.

A alça calibrada é um material usado classicamente em laboratório para fins de inoculação em placas e manuseio de materiais biológicos. No entanto, as técnicas de alças metálicas podem consumir muito tempo, considerando a quantidade de tempo gasto para garantir seu processo de resfriamento a cada inoculação. Além disso, alças de plástico também podem representar questões ambientais durante o processo de produção e descarte e também podem representar custos mais altos para o laboratório. Assim, em situações de recursos limitados, até os materiais mais simples podem ser restringidos devido a questões logísticas e orçamentárias, especialmente nos países em desenvolvimento. Inspirados por demandas como essas, diante de uma escassez ocasional de suprimentos de alças de plástico de laboratório, apresentamos um controle de qualidade para métodos de esterilização e estudos de custo-efetividade para o uso de varas de madeira em um país latino-americano e discutimos a possibilidade de grande uso em escala dessa técnica.

Wood-inhabiting corticioid and poroid fungi (Basidiomycota) from Reserva Ecológica da Universidade Estadual de Goiás, a remnant of the Brazilian Cerrado / Fungos corticioides e poroides (Basidiomycota) que habitam madeira da Reserva Ecológica da Universidade Estadual de Goiás, um remanescente do Cerrado Brasileiro

Abstract Corticioid and poroid fungi are traditional morphological groups composed of ligninolytic species. Due to their efficiency in wood decomposition process, many species have great ecological importance, especially in nutrient cycling, as well as for their biotechnological properties. Nevertheless, knowledge about these fungi is scarce in many phytogeographic regions of Brazil, as is the case of the Cerrado, since mycodiversity studies in this biome are mainly focused on areas of the São Paulo state. Here we present the taxonomic inventory of corticioid and poroid fungi from the Reserva Ecológica da Universidade Estadual de Goiás (REC-UEG), a Cerrado remnant in Anápolis, Goiás, Brazil. The area is covered by three typical Cerrado landscapes (cerrado stricto sensu, mesophilic forest, and gallery forest), widely explored for scientific and educational purposes by the academic and regional community which seeks to learn about and preserve its biodiversity. Exsiccates deposited in the fungarium of the Universidade Estadual de Goiás (HUEG-Fungi) were analyzed. They are the result of collections made over 20 years, in approximately 103 ha of the reserve. Samples were characterized macro and microscopically and identified based on specialized literature. 51 species were recognized, which are distributed in 33 genera, 15 families, and five orders. Species were most frequent in forested areas and among them, six are new occurrence records for the Cerrado, nine for the Midwest region, and nine for the Goiás state. These results contribute to increase the knowledge of these fungi in the Cerrado, as well as geographic distribution, and show the relevance of preserving the reserve for the regional Funga representativity.

Resumo Fungos corticioides e poroides são assim agrupados com base em aspectos morfológicos e compostos por espécies essencialmente lignícolas. Por sua eficiência no processo de decomposição da madeira, muitas espécies desses grupos apresentam grande importância ecológica, especialmente na ciclagem de nutrientes, além de propriedades para aplicações biotecnológicas. Entretanto, o conhecimento sobre esses fungos é escasso em algumas regiões fitogeográficas do Brasil, como é o caso do Cerrado, uma vez que os estudos da micodiversidade no bioma estão focados principalmente em áreas do estado de São Paulo. Portanto, aqui apresentamos o inventário taxonômico de fungos corticioides e poroides da Reserva Ecológica da Universidade Estadual de Goiás (REC-UEG), um remanescente de Cerrado no município de Anápolis, Goiás, Brasil. A área é formada por três fitofisionomias típicas do Cerrado (cerrado stricto sensu, mata mesófila e mata de galeria) e é amplamente explorada para fins científicos e educacionais pela comunidade acadêmica regional, que buscam conhecer e preservar sua biodiversidade. Foram analisadas exsicatas depositadas no fungário da Universidade Estadual de Goiás (HUEG-Fungos), cujo acervo é fruto de coletas realizadas ao longo de 20 anos nos cerca de 103 hectares da reserva. As amostras foram caracterizadas macro e microscopicamente e identificadas com base na literatura especializada. Foram reconhecidas 51 espécies, distribuídas em 33 gêneros, 15 famílias e cinco ordens. As espécies são mais frequentes em áreas de mata na reserva e entre elas seis configuram novos registros de ocorrência para o Cerrado, nove para região Centro-Oeste e nove para o estado de Goiás. Desse modo, esses resultados contribuem para ampliar o conhecimento desses fungos no Cerrado, assim como da distribuição geográfica das espécies, além de mostrar a importância da preservação da reserva para a representatividade da Funga regional.

Wooden sticks for plaque streaking and microbiological inoculation might be more cost- effective, but is its large scale use feasible? Quality control methods and proof of concept / Métodos de controle de qualidade e prova de conceito para a utilização de palitos de madeira em microbiologia podem ser mais econômicas, mas seu uso em larga escala é viável? Método de controle de qualidade e prova de conceito

The loop is a material classically used in the laboratory for the purpose of plate streaking and handling biological materials. However, metal loops techniques might be time consuming, considering the amount of time spent to guarantee its cooling process through each inoculation. Furthermore, plastic loops may also represent environmental issues during its production and discard process and can also represent higher costs for the laboratory. Thus, in situations of limited resources, even the simplest materials can be restricted due to logistical and budgetary issues, especially in developing countries. Inspired by demands like these, facing an occasional shortage of supply of laboratory plastic handles, we hereby present a quality control for sterilization methods and cost-effectiveness studies towards the use of wooden sticks in a Latin American country and we discuss the possibility of the large-scale use of this technique.

A alça calibrada é um material usado classicamente em laboratório para fins de inoculação em placas e manuseio de materiais biológicos. No entanto, as técnicas de alças metálicas podem consumir muito tempo, considerando a quantidade de tempo gasto para garantir seu processo de resfriamento a cada inoculação. Além disso, alças de plástico também podem representar questões ambientais durante o processo de produção e descarte e também podem representar custos mais altos para o laboratório. Assim, em situações de recursos limitados, até os materiais mais simples podem ser restringidos devido a questões logísticas e orçamentárias, especialmente nos países em desenvolvimento. Inspirados por demandas como essas, diante de uma escassez ocasional de suprimentos de alças de plástico de laboratório, apresentamos um controle de qualidade para métodos de esterilização e estudos de custo-efetividade para o uso de varas de madeira em um país latino-americano e discutimos a possibilidade de grande uso em escala dessa técnica.

Wooden sticks for plaque streaking and microbiological inoculation might be more cost- effective, but is its large scale use feasible? Quality control methods and proof of concept

Abstract The loop is a material classically used in the laboratory for the purpose of plate streaking and handling biological materials. However, metal loops techniques might be time consuming, considering the amount of time spent to guarantee its cooling process through each inoculation. Furthermore, plastic loops may also represent environmental issues during its production and discard process and can also represent higher costs for the laboratory. Thus, in situations of limited resources, even the simplest materials can be restricted due to logistical and budgetary issues, especially in developing countries. Inspired by demands like these, facing an occasional shortage of supply of laboratory plastic handles, we hereby present a quality control for sterilization methods and cost-effectiveness studies towards the use of wooden sticks in a Latin American country and we discuss the possibility of the large-scale use of this technique.

Resumo A alça calibrada é um material usado classicamente em laboratório para fins de inoculação em placas e manuseio de materiais biológicos. No entanto, as técnicas de alças metálicas podem consumir muito tempo, considerando a quantidade de tempo gasto para garantir seu processo de resfriamento a cada inoculação. Além disso, alças de plástico também podem representar questões ambientais durante o processo de produção e descarte e também podem representar custos mais altos para o laboratório. Assim, em situações de recursos limitados, até os materiais mais simples podem ser restringidos devido a questões logísticas e orçamentárias, especialmente nos países em desenvolvimento. Inspirados por demandas como essas, diante de uma escassez ocasional de suprimentos de alças de plástico de laboratório, apresentamos um controle de qualidade para métodos de esterilização e estudos de custo-efetividade para o uso de varas de madeira em um país latino-americano e discutimos a possibilidade de grande uso em escala dessa técnica.

Clarification on Kidney-deficiency Constipation Treated by Classic Prescription Jichuanjian / 中国实验方剂学杂志

Jichuanjian， from the Jing Yue’s Collected Works by Zhang Jingyue， a famous doctor of Ming Dynasty， is composed of Angelica， Achyranthes bidentata， Cistanche deserticola， Alismatis Rhizoma， Shengma and Fructus Aurantii. It is one of the first 100 classic prescriptions published by the National Administration of Traditional Chinese Medicine. The original book states that where the disease is related to deficiency， with impacted stool， medicines such as Xiaohuang prescription cannot be used. If the treatment is needed， Jichuanjian should be applied. Through the textual research of ancient and modern literature， it is found that the efficacy of Jichuanjian has changed from ancient to modern times. In the medical books of the Ming and Qing Dynasties and the modern ones， the treatment is mostly carried out based on the constipation due to deficiency recorded in the original book， while in contemporary times， the treatment of Jichuanjian focuses on kidney （yang）-deficiency constipation and yin-deficiency constipation. Especially since modern times， Jichuanjian is frequently used to treat kidney-deficiency constipation according to the description in the planning textbooks of traditional Chinese medicine colleges and universities， which causes doubts among the authors. To actively respond to the call of General Secretary Xi Jinping that we should strengthen the sorting and excavation of the essence of classical medical books， this paper analyzed and demonstrated the original text and the drug composition， traceability and application by future generations of Jichuanjian based on the Jing Yue’s Collected Works. It was concluded that Jichuanjian was prepared for the treatment of constipation due to weak constitution， fluid deficiency， and emergent purgation， aiming for constipation due to weak constitution and fluid consumption rather than kidney-deficiency constipation described in modern textbooks. As Jichuanjian was developed for similar syndromes， it was reasonable that it was understood by later generations of doctors from the perspective of liver and kidney as well as earth dampness and wood stagnation， which however remains to be further explored and verified in clinic. By combing and discussing the efficacy of Jichuanjian， this paper could provide theoretical basis for the clinical application and modern development of Jichuanjian.

Effect of regulated deficit irrigation (RDI) on the vegetative growth of pear variety Triunfo de Viena (Pyrus communis L.) / Efecto del riego deficitario controlado (RDC) en el crecimiento vegetativo del peral variedad Triunfo de Viena (Pyrus communis L.)

ABSTRACT One of the consequences of a water deficit in the vegetative growth is the modification of the plant vigor, which determines the extent and the rate of growth and lengthening in shoots, which, in this phase, is more important than fruit growth, which is very slow in terms of dry mass accumulation. The objective of this research was to determine the effect on the vegetative growth of the pear variety Triunfo de Viena (Pyrus communis L) of regulated deficit irrigation (RDI), which was compared with a control irrigated at 100% crop evapotranspiration (ETc). The irrigation treatments consisted of the application of watering regimes of 74 and 48% ETc in treatment T2 and 60 and 27% ETc in treatment T3 in 2014 and 2015, respectively, during the period of rapid fruit growth with the same watering regime used in T1 (control) applied during the rest of the season. The irrigation reduction used in T2 and T3 represented water savings of 26% and 40% in 2014 and 52% and 73% in 2015, respectively. In the deficit treatments, there were no significant differences with respect to the control for the length, or absolute and relative growth rates (AGR and RGR) of the shoots. The weight of the wood from the fructification pruning had a significant difference between T3 and the control.

RESUMEN Una de las consecuencias del déficit hídrico en el crecimiento vegetativo es la modificación del vigor de la planta, que determina la extensión y el ritmo de crecimiento y de alargamiento de los brotes que, en esta fase, es más importante que el crecimiento del fruto, el cual, es bastante lento, en términos de acumulación de masa seca. El objetivo de esta investigación fue determinar el efecto sobre el crecimiento vegetativo del peral variedad Triunfo de Viena (Pyrus communis L.) del riego deficitario controlado (RDC), que se comparó con un Control, regado al 100%, de la evapotranspiración del cultivo ETc. Los tratamientos de riego consistieron en la aplicación de láminas de agua, correspondiente al 74 y 48% de la ETc, en el tratamiento T2 y 60 y 27% de la ETc, en el tratamiento T3, en 2014 y 2015, respectivamente; durante el periodo de crecimiento rápido del fruto, mientras el resto de la temporada, todos se regaron igual que el T1 (control). La reducción de la lámina de riego en T2 y T3, durante este periodo, representó un ahorro de agua de 26 y 40%, en 2014 y 52 y 73%, en 2015, respectivamente. En los tratamientos deficitarios no hubo diferencias significativas respecto al control, en el diámetro, la longitud, la tasa absoluta y la relativa de crecimiento (TAC y TRC) de brotes. En la masa de madera correspondiente a la poda de fructificación, se presentó diferencia significativa, entre el T3 y el control.

Intrauterine and postnatal exposure to tobacco and wood smoke on hypothalamic development and cognition: an integrative review of the literature / Exposición intrauterina y postnatal al humo de tabaco y de leña en el desarrollo hipotalámico y la cognición: una revisión integrativa de la literatura

SUMMARY: Exposure to air pollution and its pollutants has been associated with important effects on human health since the first years of life, thus it has been seen that exposure to tobacco smoke and wood smoke is directly related to cardiovascular and pulmonary diseases, respiratory and cancers. However, exposure to air pollution during fetal development and its effects on brain structure and function during early childhood and adolescence have been little studied. In this review we have analyzed the literature on prenatal exposure to tobacco and wood smoke and its relationship with hypothalamic development and cognition in the first years of life.The molecular, morphological and physiological aspects of the relationship between pre- and postnatal exposure to tobacco and wood smoke with neural developmental, cognitive and behavioral problems during early childhood and adolescence have not yet been fully clarified. The information available in the scientific literature based on antecedents obtained from epidemiological studies has been negatively affected by confounding variables and great methodological challenges that make it impossible to affirm an exact causal relationship with certainty.

RESUMEN: La exposición a la contaminación del aire se ha asociado con importantes efectos en la salud humana desde los primeros años de vida. Estudios han demostrado con certeza que la exposición al humo de tabaco y humo de leña está directamente relacionada con enfermedades cardiovasculares, pulmonares, respiratorias y cánceres. Sin embargo, la exposición a la contaminación del aire durante el desarrollo fetal y sus efectos a posteriori sobre la estructura y función del cerebro durante la primera infancia y la adolescencia son aún desconocidos. En esta revisión analizamos la literatura sobre la exposición prenatal al tabaco y al humo de leña y su relación con el desarrollo hipotalámico y la cognición en los primeros años de vida. Los aspectos moleculares, morfológicos y fisiológicos de la asociación entre la exposición pre y postnatal al humo de tabaco o al humo de leña con problemas del desarrollo neurológico normal, cognitivos y de comportamiento durante la primera infancia y la adolescencia aún no se han aclarado completamente. La información disponible en la literatura científica basada en antecedentes obtenidos de estudios epidemiológicos ha sido afectada negativamente por variables de confusión y grandes desafíos metodológicos que hacen imposible afirmar una relación directa y causal exacta con certeza.

Therapeutic effects of Durian wood bark extract on a rat model of rheumatoid arthritis / Los efectos terapéuticos del extracto de corteza de madera durián en un modelo de rata de artritis reumatoide

ABSTRACT Background: Rheumatoid arthritis (RA) is a common immune-mediated inflammatory disease characterized by increased inflammation of synovial joint, and often associated with disability. Although several studies have demonstrated the medicinal properties of durian, little is known about the role of durian wood bark for medicinal purposes. Thus, this study investigated the anti-arthritic activity of durian wood bark extract in a rat model of rheumatoid arthritis. Methods: The rats were divided into five groups, including control, RA model, and RA model treated with durian wood bark extract (20, 30, and 40 mg/kg/day for 14 days). The effects of treatment were evaluated by clinical, as well as histological changes in the ankle joints, and the expression level of inducible nitric oxide synthase (iNOS). Results: A complete Freund's adjuvant (CFA)-induced RA model in rats was successfully, characterized by the swelling of hind limbs, histopathological changes in ankle joints, and the upregulation of iNOS expression. The administration of durian wood bark extract at a dose of 40 mg/kg attenuated all parameters analyzed in CFA-induced RA model in rats. Conclusion: Amelioration of hind limb swelling, histopathological changes, and iNOS expression in the RA model indicates that durian wood bark extract can be considered as a new treatment alternative that reduces joint symptoms, as well as a future area of research in humans.

RESUMEN Antecedentes: La artritis reumatoide (AR) es una enfermedad inflamatoria común mediada por el sistema inmunológico que se caracteriza por una mayor inflamación de la articulación sinovial, y a menudo se asocia con discapacidad. Aunque en varios estudios se han demostrado las propiedades medicinales del durián, se conoce poco sobre el papel de la corteza de madera de durián con fines médicos. Así pues, en este estudio se investigó la actividad antiartrítica del extracto de corteza de madera de durián en un modelo de AR en ratas. Métodos: Las ratas se dividieron en 5 grupos, incluyendo el control, el modelo de AR y el modelo de AR tratado con extracto de corteza de madera durián (20, 30 y 40mg/kg/día durante 14 días). Los efectos del tratamiento se evaluaron mediante cambios clínicos e histológicos en las articulaciones de los tobillos y el nivel de expresión de la sintasa de óxido nítrico inducible (iNOS). Resultados: Desarrollamos con éxito un modelo completo de AR inducida por adyuvantes de Freund (CFA) en ratas, caracterizado por la hinchazón de las extremidades posteriores, los cambios histopatológicos de las articulaciones del tobillo y el aumento de la expresión de la iNOS. La administración de extracto de corteza de madera de durián a una dosis de 40 mg/kg atenuó todos los parámetros analizados en el modelo de AR inducida por CFA en ratas. Conclusión: La mejora de la hinchazón de las extremidades traseras, los cambios histopatológicos y la expresión de iNOS en el modelo de AR indican que el extracto de corteza de madera dura puede considerarse una nueva alternativa de tratamiento para reducir los síntomas de las articulaciones, con un futuro campo de investigación en los seres humanos.

Hipomelanosis macular progresiva: respuesta al tratamiento con minociclina / Progressive macular hypomelanosis: response to treatment with minocycline

La hipomelanosis macular progresiva (HMP) es una dermatosis caracterizada por máculas hipopigmentadas, que se observa con mayor frecuencia en las mujeres y en los fototipos III y IV. Se ha asociado a Cutibacterium acnes (C. acnes) de tipo III como factor etiológico. Se presenta el caso de una paciente de 30 años, con máculas hipopigmentadas redondeadas en el tronco y la raíz de los miembros inferiores, de 10 años de evolución. El estudio histológico informó disminución del número de melanocitos y de pigmento melánico en la capa basal e infiltrado inflamatorio mononuclear perivascular superficial. Se indicó minociclina 100 mg/día por vía oral durante 8 meses, tras lo cual se observó la resolución total de las lesiones.

Progressive macular hypomelanosis (PMH) is a dermatosis characterized by hypopigmented macules, most frequently found in females and in phototypes III and IV. Cutibacterium acnes (C. acnes) type III has been associated as an etiological factor. We present the case of a thirty-year-old female patient with a 10-year history of nummular hypopigmented macules located on the top of the lower limbs and on the trunk. The histological study reported a decrease in the number of melanocytes and melanotic pigment in the basal layer and the presence of superficial perivascular mononuclear inflammatory infiltrate. After an 8-month regimen of oral minocycline 100 mg/day, there was a complete resolution of the lesions.

Chemical Characterization and Antiradical Properties of Pyroligneous Acid from a Preserved Bamboo, Guadua angustifolia Kunth

Abstract Pyroligneous acid (PA) was obtained by condensation of the vapors produced in the thermal decomposition of culms residues from Guadua angustifolia Kunth (G. angustifolia) cultivated in Colombia, with and without previous preservation treatment with borax salts. Chemical characterization by GC-MS showed that PA extracts has high content of phenolic compounds. Mequinol, isocreosol, 4-ethylphenol, 4-ethyl-2-methoxyphenol, 3,5-dimethoxy-4-hydroxytoluene and 2,6-dimethoxyphenol were the most abundant substances, identified. The total phenolic content (TPC) and DPPH free radical scavenging activity, were investigated. TPC showed a concentration of 1.959 mg GA g-1±0.010 and 3.844 mg GA g-1±0.027 to PAC and PAS samples. These samples also exhibited high DPPH activity of 70.975%±0.921 and, 16.667%±0.298, respectively. The chemical composition, TPC and DPPH results indicate that the PA extracts obtained from G. angustifolia may be used as a raw material in the food industry as natural preservative, in medicine as alternative to antibiotics and in agriculture as insect repellent and foliar fertilizer.

Impact of maternal exposure to wood smoke pollution on fetal lung morphology in a rat model / Impacto de la exposición materna a la contaminación por humo de leña en la morfología pulmonar fetal en un modelo de rata

SUMMARY: Residential heating with wood is an important source of ambient air pollution. Evidence links air pollution to serious health effects such as respiratory and cardiovascular mortality and morbidity. We hypothesized that prenatal exposure to wood smoke pollution causes morphological changes in the development of the rat lung, leading to altered lung structure and function during later life. We presumed that analysis of the fetal lung stereology provides novel insights into the underlying processes mediating particulate matter associated developmental changes and damage. The objective of the study was to investigate the effects of exposure during gestational period to wood smoke pollution on lung fetal morphology. To test this, pregnant rats were exposed during pregestational and gestational periods to wood smoke pollution. Complete lungs samples were obtained from 24 fetus from healthy female G3 rats subjected to cesarean at 19 days post-fecundation. The lungs were prepared for histological and stereological analysis. The volume fraction of terminal bronchioles VV [tb, lung] and volume fraction of parenchyma VV [par, lung], surface density of terminal bronchioles SV [tb, lung] as well as numerical density of bronchiolar exocrinocytes NA [ec,lung] were calculated by light microscopy. Statistical analysis detected significant differences between groups in volume density VV [tb, lung; %] (p=0.0012) and surface density SV [tb, lung; mm2/mm3] (p<0.0001) of the terminal bronchioles. However, it did not show differences between groups in the stereological parameter volume density VV [par, lung; %] (p=0.0838) and numerical density of bronchiolar exocrinocytes NA [ec,lung; nº/mm2] (p=0.0705). The analysis of the evidence obtained indicates that exposure to environmental pollution was affects lung maturation, and particularly the proportion and area of terminal bronchioles in the fetal lung. In conclusion, maternal exposure to wood smoke pollution during pregnancy was associated with a decrease in the lower conducting airways of lungs, which, according to urban pollution studies, could be related to early childhood lower respiratory illness. The public health implications of this study are that reducing or avoiding exposure to wood smoke is important before and during pregnancy.

RESUMEN: La calefacción residencial con leña es una fuente importante de contaminación ambiental. La evidencia vincula la contaminación del aire con graves efectos sobre la salud, como la mortalidad y la morbilidad respiratoria y cardiovascular. Hipotetizamos que la exposición prenatal a la contaminación por humo de leña causa cambios en el desarrollo del pulmón de rata, lo que conduce a una morfo-función pulmonar alteradas durante la vida posterior, creemos que el análisis de la estereología pulmonar fetal proporcionará nuevos conocimientos sobre los procesos subyacentes que median esos cambios. El objetivo del estudio fue investigar los efectos de la exposición prenatal a la contaminación ambiental por humo de leña sobre la morfología pulmonar fetal. Ratas preñadas fueron expuestas durante los períodos pregestacional y gestacional a la contaminación por humo de leña. En fetos de 19 días post-fecundación fue obtenido el pulmón para análisis histológico y estereológico. Fue determinado la fracción de volumen de bronquiolos terminales VV [tb, pulmón], fracción de volumen del parénquima VV [par, pulmón], densidad superficial de los bronquiolos terminales SV [tb, pulmón] así como la densidad numérica de exocrinocitos NA [ec, pulmón]. El análisis estadístico detectó diferencias significativas entre grupos en la densidad de volumen V [tb, pulmón; %] (p=0,0012) y densidad superficial SV [tb, pulmón; mm2/mm3] (p<0,0001) de los bronquiolos terminales. Sin embargo, no demostró diferencias entre grupos en la densidad de volumen VV [par, pulmón; %] (p=0,0838) y numérica de exocrinocitos bronquiolares NA [ec, pulmón; nº / mm ] (p=0,0705). El análisis de la evidencia obtenida indica que la exposición a la contaminación ambiental afectó la maduración pulmonar, y particularmente la proporción y área de bronquiolos terminales en el pulmón fetal. En conclusión, la exposición materna a la contaminación por humo de leña durante la gestación se asoció a una disminución de las vías respiratorias conductoras de aire en pulmón, lo que, según estudios de contaminación urbana, podría estar relacionado con enfermedades de las vías respiratorias inferiores en la primera infancia. Las implicaciones para la salud pública de este estudio son que reducir o evitar la exposición al humo de leña es importante previo y durante la gestación. Por otro lado, la contaminación por humo de leña tiene un gran impacto en la salud pública que, en teoría, es posible prevenir.

Exposure to wood smoke pollution during pre-gestational period of rat has effects on placenta volume and fetus size / La exposición a la contaminación por humo de leña durante el período pregestacional de la rata tiene efectos sobre el volumen de la placenta y el tamaño del feto

SUMMARY: Studies in humans showed that prenatal exposure to urban air pollution (AP) influences fetal development, and increases the incidence of adverse pregnancy outcomes and some diseases in postnatal life. However, most of these were performed in environments where the main source of environmental particulate matters (PM) emission is diesel combustion by motor vehicles and industries, thereby ignoring the effects produced by wood smoke pollution. We hypothesized that morphological changes in the placenta could contribute to the reduction in fetal size associated with different periods of exposure to AP produced by wood smoke pollution prior to and during pregnancy. The objective of the study was to investigate the quantitative effects of long-term exposure to environmental levels of wood smoke pollution on the macroscopic and microscopic morphology of the placenta in rats. To test this, pregnant rats were exposed during pregestational and gestational periods to wood smoke pollution in indoor and outdoor environments. At 19 days of gestation, the placentas were obtained by caesarean and were prepared for histological, planimetric and stereological analysis. The volume and proportions of the placental compartments were estimated. In addition, stereological estimators in fetal capillaries were calculated in the labyrinth region. Crown rump length, fetus weight and litter weight were influenced by pregestational and gestational exposure periods. Exposure to wood smoke pollution during pregestational period has significant effect on the volume of the placenta, and consequently on fetal height. In conclusion, this study demonstrated that long-term outdoor exposure to wood smoke pollution from residential heating affects fetal health, decreasing the absolute volume of the entire placenta and the placental interface between the mother and fetus, decreasing the total volume of blood vessels present in the labyrinth region ofthe placenta and affecting the size of the fetus.

RESUMEN: Estudios en humanos demostraron que la exposición prenatal a la polución del aire urbano influye en el desarrollo fetal y aumenta la incidencia de resultados adversos de la gestación y algunas enfermedades postnatales. Sin embargo, la mayoría de ellos fueron realizados en entornos donde la principal fuente de emisión de material particulado, fue la combustión de petróleo por vehículos a motor e industrias, ignorando los efectos producidos por el humo de leña producido por la calefacción intradomiciliaria. Hipotetizamos respecto a que los cambios de la placenta contribuirían a la disminución del tamaño fetal relacionado a los períodos de exposición al humo de leña durante los periodos pregestacional y gestacional. El objetivo del estudio fue investigar los efectos cuantitativos de la exposición al humo de leña sobre la morfología macroscópica y microscópica en placenta de ratas. Para probar esto, ratas preñadas fueron expuestas durante los períodos pregestacional y gestacional a la contaminación por humo de leña en ambientes interiores y exteriores. A los 19 días de gestación, las placentas fueron obtenidas por cesárea y fueron preparadas para un análisis histológico, planimétrico y estereológico. Fue estimado el volumen absoluto y las proporciones de los compartimentos placentarios. Además, fueron calculados estimadores estereológicos en capilares fetales del laberinto y trofoblasto. La longitud, el peso del feto y el peso de la camada fueron influenciados por los períodos de exposición pregestacional y gestacional. La exposición a la contaminación por humo de leñá durante el período pregestacional tuvo un efecto significativo en el volumen de la placenta y, en consecuencia, en la altura del feto. En conclusión, este estudio demostró que la exposición a largo plazo al humo de leña afecta la salud del feto, disminuyendo el volumen absoluto de la placenta, además, afecta la interfaz placentaria entre la madre y feto, disminuyendo el volumen total de vasos sanguíneos presentes en la región del laberinto placentario y por consecuente afectando el tamaño del feto.

Brazilian cerrado species: wood characteristics / Espécies do cerrado brasileiro: características da madeira

The characterization of wood anatomy and proprieties can provide subsidies for rational use of tree species. Enables, oftentimes, the definition of technological potential of wood - and wood products - through the assessment of quality information and also allows it ́s correct identification, contributing to the timber production chain. The objective of this study was to contribute to the knowledge about wood properties of the Cerrado biome (Brazilian savanna) species trough the anatomical characterization and determination of density profile. Twenty trees species belonging to thirteen families occurring in Pirenópolis, Goiás and Brasília, Federal District, Brazil, was selected and radial samples were removed from the tree trunks at the DBH (1.30 m) in a non-destructive way using an incremental probe and a motorized extractor. The qualitative and quantitative anatomical parameters of vessels and fibers and the wood density were determined in the collected samples. Species presented fibers with mean values between 900.5 and 2052.9 µm for the length; 18.1 and 27.7 µm for the diameter; and 4.4 to 9.4 µm for the wall thickness. The species presented a variation in the vessel dimensions from 29.2 to 155.6 µm for the diameter; 17.7 to 32.5% for occupied area; and 2.6 to 165 to vessels.mm-2. The apparent density presented mean values between 0.36 and 1.21 g cm-3. The specie that presented the highest variation of wood density was A. fraxinifolium. According to the radial profiles two patterns of increasing and stable variation in the apparent density of the pith to bark were defined as a function of the wood anatomical characteristics.

A caracterização anatômica e das propriedades da madeira pode auxiliar na tomada de decisão quanto ao uso racional de espécies. Possibilita, muitas vezes, a definição do potencial tecnológico da madeira - e produtos - fornecendo acesso a informações sobre a sua qualidade, além de sua correta identificação, contribuído com a cadeia produtiva madeireira. O objetivo deste estudo foi investigar e caracterizar as propriedades da madeira de espécies arbóreas do Cerrado, através da descrição anatômica e determinação do perfil de densidade. Foram selecionadas 20 espécies pertencentes a treze famílias, na cidade de Pirenópolis, Goiás e Brasília, Distrito Federal, Brasil, e amostras radiais foram retiradas dos troncos das árvores no DAP (1,30 m) de forma não destrutiva, utilizando-se uma sonda de incremento e um extrator motorizado. Nas amostras coletadas, foram determinados os parâmetros anatômicos qualitativos e quantitativos dos vasos e das fibras e a densidade aparente da madeira. As espécies apresentaram fibras com valores médios entre 900,5 a 2052,9 µm para o comprimento; 18,1 a 27,7 µm para o diâmetro e 4,4 a 9,4 µm para a espessura da parede; e variação nas dimensões dos vasos de 29,2 a 155,6 µm para o diâmetro; 17,7 a 32,5% para área ocupada; e 2,6 a 165 vasos.mm-2 para a frequencia dos vasos. A densidade aparente apresentou valores médios entre 0,36 e 1,21 g cm-3. A espécie que apresentou a maior variação de densidade de madeira foi A. fraxinifolium. De acordo com os perfis radiais, dois padrões de variação crescente e estável na densidade aparente, da medula para casca, foram definidos como uma função das características anatômicas.

A Clinico Epidemiological Study of Periocular Hyperpigmentation.

Periorbital pigmentation is a relatively common condition encountered in dermatology practice. The aetiology of periocular pigmentation may be multifactorial. There is a scarcity of data regarding the prevalence of the condition mainly because of its transitory and floating nature, the lack of reasonable etiologic explanations, and the fact that the condition is considered just a cosmetic nuisance. We wanted to study the clinical and epidemiological characteristics of periocular hyperpigmentation and assess the proportion of various determinants in adult patients.METHODSA descriptive study was done among 130 adult patients with periocular pigmentation who attended a tertiary care hospital in Kerala during a period of one and a half years. A detailed history, dermatological and system examination, Wood’s lamp & relevant laboratory investigations were done and results were analysed using appropriate biostatistics.RESULTSMajority of the patients belonged to 2nd decade and females predominated. Atopy and regular cosmetic usage were seen in 72% of the patients. Involvement of both eyelids was seen in 53.8% & post inflammatory was the most common type seen. Iron deficiency anaemia was the commonly associated systemic illness seen and stress aggravated the condition in 55.4% of our patients. 51.5% had grade 3 pigmentation. Wood’s lamp examination showed a predominance of epidermal pigmentation in 49.2% patients.CONCLUSIONSAlthough considered a phenomenon within the limit of physiology, patients, especially women, are really bothered and concerned about it, even relating the presence of dark circles with significant impairment on their quality of life. A proper understanding of the etiopathogenesis is important which includes identification and therapeutic targeting of each contributing etiologic factor for an individual patient.

Chemical composition and antimicrobial activities of wood vinegars from carambola, coconut shells and mango against selected plant pathogenic microorganisms

Aims@#This work aimed to evaluate the antimicrobial activities of three different sources of wood vinegars obtained from pyrolysis of carambola (Averrhoa carambola), coconut shells (Cocos nucifera) and mango (Mangifera indica) and to identify their chemical composition. @*Methodology and results@#Agar well diffusion technique was employed to assay the antifungal activity of the wood vinegars against Fusarium oxysporum, Colletotrichum gleosporoides, and Pestalotiopsis microspora and disc diffusion technique for antibacterial screening against Ralstonia solanacearum. The chemical compositions of these wood vinegars were also analyzed using GC-MS by employing the headspace technique. All wood vinegars exhibited antimicrobial activity against tested pathogens. Wood vinegar from carambola exhibited the most promising antimicrobial effect followed by coconut shells and mango. The GC-MS analysis revealed the wood vinegars from coconut shells, carambola, and mango are different in the chemical composition and active compounds. Major compounds identified in coconut shells are furfural, phenol, benzofuran, acetic acid, hexanal, ethanone, and formic acid. In carambola, the main compounds are furfural, imidazole, 3-pyridinecarboxaldehyde, benzaldehyde, phenol, benzofuran, indene, acetic acid, indazole, naphthalene, cyclohexanecarboxylic acid, palmitamide, palmitic acid, heptadecanenitril, and sterylamide. Meanwhile, the main chemical compounds in the pruning of mango-based vinegar consist of toluene, furfural, imidazole, annulene, benzaldehyde, phenol, carbamic acid, acetic acid, naphthalene, heptadecanenitril, and stearylamide.@*Conclusion, significance and impact of study@#It is suggested that wood vinegar from carambola, coconut shells, and mango is a promising antimicrobial agent in plant disease control, showing good potential for inhibition of selected plant pathogenic microorganisms.

Identification and control of wood-deteriorating fungi / Identificação e controle de fungos deterioradores de madeira

Wood is rich in organic compounds; thus, it is susceptible to attacks by several deteriorating agents because they acknowledge such attacks as a necessary energy supply. Fungi stand out among these agents since they can attack the wood in trees (before felling) and in several post-felling stages. Fungi are biological agents that use organic compounds as food sources, and that is the reason why they degrade most chemical components found in wood. Wood attacked by fungi suffers significant value loss, since these degrading agents affect their mechanical and aesthetic properties. Fungi ­ which are classified as staining, molding and rotting ­ are one of the main responsible for the biggest losses in the timber industry. Wood can be virtually used in a whole range of environments, a fact that makes it susceptible to attacks by different fungal species, since the ideal conditions for fungal development change from species to species. In other words, the fact that one or more fungal species are capable of deteriorating wood is directly related to conditions wood is subjected to. Thus, it is essential knowing how to evaluate fungal attacks, symptoms to be taken into consideration at the time to identify the type of attacking organism and the attack stage, as well as the control and prevention measures to be applied to these organisms.(AU)

Rica em compostos orgânicos, a madeira é suscetível ao ataque de diversos agentes deterioradores por ser reconhecida como suprimento necessário de energia. Entre esses agentes, destacam-se os fungos, cujo início de ataque pode se dar ainda na árvore, antes do abate e nas diversas fases posteriores. Os fungos são agentes biológicos que necessitam de compostos orgânicos como fontes de alimento e, por essa razão, degradam grande parte dos componentes químicos da madeira. As madeiras, quando atacadas por fungos, sofrem grandes perdas de valor, afetando suas propriedades mecânicas e estéticas. Os fungos são considerados um dos principais responsáveis pelos maiores prejuízos na indústria madeireira e são classificados como manchadores, emboloradores e apodrecedores. Praticamente, a madeira pode estar em uso em uma variedade de ambientes; sabendo-se que as condições ideais de desenvolvimento de um fungo são diferentes para cada espécie, a madeira ficará suscetível ao ataque por diferentes espécies de fungos. Ou seja, o fato de uma ou mais espécies de fungos serem encontradas deteriorando a madeira está diretamente relacionado às condições em que ela se encontra. Dessa forma, torna-se importante saber como avaliar os ataques feitos por fungos, os sintomas a serem considerados para identificar o tipo de organismo e o estágio do ataque, bem como as medidas de controle e prevenção desses organismos.(AU)